Wood Veneered Wall & Ceiling Panels | Gustafs

Wooden panels for walls and ceilings covered in natural wood is a challenge involving craftsmanship and experience. Most of Gustafs products are based on a fiber gypsum board which has very good properties regarding both fire safety and acoustics. The acoustic wood panel is less sensitive to changes in temperature and humidity which in turn maintains the panels’ linearity over time. This unique combination contributes to a wall cladding panel suited for applications not only in large areas but also in a wide variety of demanding situations.

Characteristics

• Fire
  The high-density nonflammable core and the surface veneer’s strongly bound adhesion to the fiber gypsum board make the panels ‘non-flammable’
• Acoustics
  Acoustically, the use of innately heavy wall cladding is often favorable compared to lighter materials. Gustafs panels weight of 15 kg/m² is roughly twice as heavy as most wood-based panel materials.
• Integrated System
  Gustafs Panel System provides fully integrated and concealed installation fixtures called Gustafs Capax. The installation is quick, reliable and cost-saving.
• Stability
  Wood-based panels will show bulging or shrinkage when humidity and temperature change. A fiber gypsum board is considerably less susceptible to these effects. Over time this will result in a planer and a more linear surface.
• Sustainability
  Using a fiber gypsum core naturally results in extremely low emissions and a very high rate of recycled content. The panels are produced with renewable power sources.

Surface design

• Veneer
  Wood has a natural variation in structure and color tone which ages in harmony with nature.
• Pigmented Veneer
  A pigment can be used to change the color tone of the wood veneer. A three-stage scale of white pigment for wood veneers is available.
• Stained Veneer
  You can stain the wood veneer to achieve different effects on your wall or ceiling.
• Painted Veneer
  Among the many advantages of a Gustafs wooden panel is its plane and even surface which enables a painted surface finish that maintains the wooden texture of the surface. Surfaces in a multitude of colors can be specified in accordance with for example NCS or RAL codes up to a gloss rate up to 50.
• Painted in Solid Colors
  An alternative to wood veneer and laminate panels is to paint directly on the panel. The even surface enables painted surface finish which otherwise is extremely difficult to achieve on-site.
• Laminate
  An alternative to wood is laminate cladding panels for walls and ceilings. Different surfaces create different expressions. On top of Gustafs smooth, flat panel core the laminate coating achieves an overall impression that can hardly be achieved with a surface treated on site. Laminate panels achieve fire classification B-s1,d0.

Specifications

Dimensions

• Thickness: 13,2 mm
• Dimensions Wall Standard:
  • 600×600 / 1200×600 / 1500×600 / 1800×600 / 2400×600 mm
• Customized wall:
  • lengths 300-3000 x widths 300-1200 mm
• Dimensions Ceiling Standard:
  • 600×600 / 1200×600 / 1500×600 / 1800×600 / 2400×600 mm
• Customized ceiling:
  • lengths 300-3000 x widths 300-600 in 50 mm intervals

Application and use in Construction

Material

Properties